Your Cart:
0 Items
Order Total: $0.00

0 Product
$0.00




4 Advantages of Using Ground Copper Wire PDF Print E-mail
Written by Administrator   
Saturday, 26 June 2010 10:46
AddThis Social Bookmark Button

Copper has been used to many things, pipes and utensils with copper wire to the ground. If you are working on electrical outlets, switches or wiring of an entire building, you must be grounded to prevent electric shock. There are other metals that can be used as the son of mass, but there are significant advantages to the use of copper wire to the ground. This article will share some of those advantages.
Copper wire to the ground is non corrosive

Under copper most cases would deteriorate fairly quickly. This happens because the copper is not getting along with other alloys of different electropotential. If you wrap the copper wire to the ground around an iron pipe copper wire the ground begins to erode. Another example of this type of corrosion is the Statue of Liberty. Many do not know this but the Statue of Liberty is actually made of copper in the thickness of two hundred. Copper has been placed on steel beams and iron. It is this connection that causes copper to turn green. Inside the house of copper wire to the ground is attached to the metal that will not cause them to corrode. In significant construction projects of copper wire ground is usually shielded by plastic, but some houses have a son naked attached to the metal box.
Easy to handle

The typical size of a field of a copper wire is # 10 gauge. You can, however, to find copper wire used for the land in small sizes, but the son is normally found in houses. You can easily wrap around the son of pipes, holes, and even tie them in knots. The copper wire standard floor is also easy to move wherever you want it to go. Because of the plastic wrap around the wire, it makes it a little harder to be as flexible as the son naked.
Highly conductive material

Copper is highly conductive in both the electricity and heat. You can not, however, a copper wire to the ground to use in place of solid copper wire. Although copper can conduct electricity, the way the copper wire is woven together and the thickness of the latter changes the conductivity of copper wire. solid copper wire is thicker and weaving is slightly different, which allows the copper wire to handle more current. solid copper wire is used to pass the current home, while copper wire to the ground is used to end the surge of electricity. This makes copper the only appropriate choice as a ground wire. Other metals are conductors of electricity, but not to the point that the copper does. When a wave of electricity occurs copper wire will attract current and direct it toward you. You can always get a shock, but not enough to harm you seriously. Son of mass from other metals can not forward enough to run away from you pretty quickly.
User-friendly

Not all output or panel, you need to open a copper wire to the ground. You can make your own son with you and install it on the panel.

 
The tab is closed
The tab is open