Your Cart:
0 Items
Order Total: $0.00

0 Product
$0.00




4 Different Types of Conduit Bodies Explained PDF Print E-mail
Written by Administrator   
Saturday, 26 June 2010 10:52
AddThis Social Bookmark Button

There are a few different types of duct body, and all these elements are ideal for different applications. Conduit bodies are similar to junction boxes in that they allow access to draw the son. However, contrary to junction boxes, it is not possible to use organisms leads to splice son together.

An intermediate body is simply designed to provide access to help pull the cables through the conduit. This makes them particularly useful in long runs of pipe where the wire fish will not be reached, or when navigating tight corners. Many people refer to the conduct of organs by their name.
Materials

Conduit bodies are available in a wide range of different materials. They can be aluminum, PVC and galvanized steel. Fixing each of these bodies led generally depend on the material being fixed. Different materials are appropriate for different environments and levels of exposure to moisture. Carefully choose the right body electric leads so as to obtain the best results.
Body Types of electrical conduit

There are many different body types, but led some of the most popular include:
1. The organs

An L-shaped body leads to an entry that is in line with the lid. This means they can be used to route cables around tight bends at 90 degrees. If there is not enough space for a curved piece of the duct, then a strong body leads L will be the answer. The cover is simply removed so that the cables can be guided around the bend.
2. T Conduit Bodies

An organization led the T-shaped wires can be routed in three directions. This allows you to run cables along the wall, then move to the left or right. They are also much smaller than the curved sections of the ducts and can bend metal, tight turns and corners.
3. Led Unit C

bodies C-shaped leads straight through the conduit are organisms, and are used to pull cables through straight lines. They are ideal for long runs where the cable can not be pulled through the full distance.
4. Conduit Service Corps

These organizations have led service entrance, which is opposite the cover. This means they are commonly used to pass cables through a wall outside. The access cover can be removed to facilitate their new son, and replaced the connection to the weather. These lead service agencies are normally used in industrial and commercial uses. However, they are also sometimes used in homes.

By understanding the different types of organs available leads, we hope that you will be able to choose the body leads to your needs. Sometimes leading organizations are not essential for path leads, but sometimes they are very important. A lead agency will pull cables through long stretches of driving much easier, and it will be possible to bend the pipe around tight turns and corners.

 
The tab is closed
The tab is open