Your Cart:
0 Items
Order Total: $0.00

0 Product

How to Install a Home Automation Thermostat in Your Home PDF Print E-mail
Written by Muzaam   
Tuesday, 29 June 2010 09:31
AddThis Social Bookmark Button

Thermostats, home automation are becoming extremely popular because they can control things automatically, even if you're not so close to home. If you are interested in home automation, you can learn how you can automate your thermostat.

The thermostat is a temperature controlled switch very clever that will control the fire when the boiler to produce hot water for heating. An automatic thermostat can be used to control exactly when the heating on and off. home automation control are not only simplify your life, but they will also carry out environmental.

These home automation controls are a great way to precisely control when heating fires and when it stops. automatic thermostat means you do not need to burn as much gas to heat your room.
Tools and materials needed

* Home Automation Control
* Thermostat
* Screwdriver

Step 1 - Safety

As you work with electrical systems of your home, it is important to first cut off power. You can either remove the individual circuit breaker or you can close the full power off by using your master power switch housing supply.
Step 2 - Remove the old thermostat

Unscrew the old thermostat to the wall and set aside. Once the old thermostat is removed, you will be able to replace it with a new automation system thermostat.
Step 3 - Setting up the new thermostat

Unpack the new home automation thermostat and read the instructions. This must be connected to the boiler units that control the temperature of the boiler automatically.

Thermostats are equipped differently depending on the brand and type of thermostat is fitted.
Step 4 - Implementation of X10 Automation Modules

Home automation is made of X10 automation modules. X10 automation modules come in many forms. They are used to control the various modules on the existing powerlines in your home. Your thermostat X10 will be able to communicate with all these different X10 modules.
Step 5 - The installation of remote controls

Remote Control X10 transceivers can be used to control your home automation X10 thermostat control. These remotes are powered by batteries, and communicate with other home automation systems using a module that is connected to your home electrical outlet.
Step 6 - Timers

The timers can be implemented through software or other X10 modules. These can be easily installed and software can be purchased on the Internet. This will make using the thermostat automation much easier and simpler.

The tab is closed
The tab is open